Musical Surroundings SuperNova 2 Owner's Manual download pdf (Page 10)

7) INPUTS

Up to three turntables can be connected to the SuperNova simultaneously by using

the PHONO 1, PHONO 2 and PHONO 3 jacks located on the back panel. Connect the

left and right cables from your turntable(s) to the left and right PHONO 1, PHONO 2,

and PHONO 3 INPUT jacks on the SuperNova’s back panel. If your turntable has a

ground lead, connect that wire to the ground lug on the SuperNova’s rear panel.

When hooking up multiple turntables and cartridges, you may have to experiment

with connecting the ground leads for the turntables connected to the PHONO 2 and

PHONO 3 jacks to avoid ground loops.

If you have less than three turntables but multiple cartridges, you may configure the

Load and Gain of the various inputs to the different cartridges to optimize each

cartridge. Then, you only need to plug your tonearm cable into the appropriately

configured input when using that specific cartridge. Take caution when connecting

and disconnect tonearm cables not to damage delicate RCA connections on those

cables.

It is recommended that all equipment (amps, turntables, etc.) be turned off when

connecting any audio equipment.

INPUT CONNECTIONS (DIAGRAM 5)

SUPERNOVA

TURNTABLE 1

TURNTABLE 2

TURNTABLE 3

Musical Surroundings

Status

Output Attenuator Source Select

Left

Right

SuperNova Phonograph Preamp

mute

-17

-11

-7.5

-5

-3

-2.3

-1.7

-1

-.5

0db

LEFT and RIGHT

RCA jack outputs

from each turntable

are plugged into

the SuperNova's

back panel.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Musical Surroundings SuperNova 2 Owner's Manual Page 10

Comments to this Manuals

Related products and manuals for Audio amplifiers Musical Surroundings SuperNova 2